ZXLD1356ET5TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Weight | 6.293594mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Lighting, Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXLD1356 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 97 % |
| Power Supplies | 24V |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 6V |
| Power Dissipation | 1W |
| Output Current | 550mA |
| Max Supply Current | 550mA |
| Max Output Voltage | 60V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Max Input Voltage | 60V |
| Output Current per Channel | 550mA |
| Min Output Voltage | -300mV |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 500kHz |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXLD1356ET5TA Overview
To save space on the board, it has a SOT-23-5 Thin, TSOT-23-5 package. LED drivers are designed with 1 outputs.Surface Mount is used for mounting.With high efficiency, it appears as a DC DC Regulator.The led light driver operates normally at -40°C~125°C TA. There are many benefits for Automotive, Lighting, Signage.It operates with 5 terminations.It has a base of 5 pins.It is mounted in the way of Surface Mount.LED drivers can be found under the base part number ZXLD1356.In this case, 60V is acceptable.5 pins are on the device.In addition, its characteristics are classified into Display Drivers.It operates at a voltage of 6V as its minimal input voltage.This system is designed to operate at a minimum voltage of 6V to achieve maximum efficiency.When the maximum supply current is allowed, the value reaches 60V.If the maximum current supply is less than 550mA, this device provides high efficiency.550mA is the maximum amount of current that can be supplied to the load.The electronic component can function fully when the switching frequency is maintained at 500kHz.LED drivers in the Automotive, AEC-Q100 series are essential for a wide range of applications.It is important that the output voltage does not exceed 60V.The minimal voltage it outputs maintains at -300mV.
ZXLD1356ET5TA Features
Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -40°C~125°C TA
Supply voltage of 24V
Switching frequency of 500kHz
ZXLD1356ET5TA Applications
There are a lot of Diodes Incorporated ZXLD1356ET5TA LED Driver ICs applications.
- Down lights
- Auxiliary lights for on-vehicle cameras
- LED Lighting PFCs, Linear Dimmable
- Amusement Machines
- Museum lighting
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Refrigeration lighting
- Sports Facility Lighting
- Industrial LED Lighting: Image Recognition Devices
