ZXLD1366DACTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 21.092045mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Lighting, Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.8W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.95mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXLD1366 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Efficiency | 97 % |
| Power Supplies | 24V |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 6V |
| Power Dissipation | 1.8W |
| Output Current | 1A |
| Max Supply Current | 1A |
| Voltage - Output | 65V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Max Input Voltage | 60V |
| Output Current per Channel | 1A |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Switching Frequency | 500kHz |
| Multiplexed Display Capability | NO |
| Height | 750μm |
| Length | 3.05mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXLD1366DACTC Overview
The board's 6-VDFN Exposed Pad package saves space. LED drivers use 1 outputs for their design.Surface Mount is used to mount the led light driver.With high reliability and efficiency, this emerges as a DC DC Regulator.It is possible for the led driver ic to operate normally at -40°C~125°C TA.There are considerable benefits for Automotive, Lighting, Signage.As a result, it operates based on the frequency of 1MHz.It operates with 6 terminations.It has a base configuration of 6 pins.A total of 2 segments are estimated.It's mounted by Surface Mount.Under the base part number ZXLD1366, you will find this LED driver.There is no maximum value acceptable for the supply voltage, so 60V is acceptable.A 65V volt output voltage is provided by this device.6 pins are used on the device.Depending on its characteristics, it is classified into Display Drivers.This device requires a minimum input voltage of 6V.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 6V.60V is the maximum value of supply current that can be used.With a minimum supply current less than 1A, this device achieves high efficiency.It is possible to supply the load with 1A current.As long as the switching frequency is maintained at 500kHz, this electronic component is able to perform all of its functions properly.
ZXLD1366DACTC Features
Available in the 6-VDFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 1MHz
Supply voltage of 24V
Switching frequency of 500kHz
ZXLD1366DACTC Applications
There are a lot of Diodes Incorporated ZXLD1366DACTC LED Driver ICs applications.
- Amusement Machines
- High-end retail lighting
- Street lighting
- Portable lighting
- LED Lightings for Inspection Devices
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for portable equipment
- Sports Facility Lighting
- General lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
