ZXLD1366ET5TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Weight | 6.293594mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Automotive, Lighting, Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXLD1366 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 97 % |
| Power Supplies | 24V |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 6V |
| Power Dissipation | 1W |
| Output Current | 1A |
| Max Supply Current | 1A |
| Max Output Voltage | 60V |
| Voltage - Output | 65V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Max Input Voltage | 60V |
| Output Current per Channel | 1A |
| Min Output Voltage | -300mV |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Switching Frequency | 500kHz |
| Multiplexed Display Capability | NO |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXLD1366ET5TA Overview
Using its SOT-23-5 Thin, TSOT-23-5 package, it is possible to save board space. LED drivers with this design have 1 outputs.It is possible to mount the led driver using Surface Mount.As a DC DC Regulator, it has high efficiency and reliability.The led light driver is capable of working normally at -40°C~125°C TA.Automotive, Lighting, Signage benefits significantly from the program.It operates at 1MHz frequency.It operates with 5 terminations.There are 5 pins on the base of this LED driver.Segments counted are 2.It's mounted in Surface Mount.ZXLD1366 is the base part number for this LED driver.It is acceptable to operate with a supply voltage of 60V.This device has an output voltage of 65V volts.5 pins are included in it.Furthermore, it can be classified as Display Drivers based on its characteristics.A minimal input voltage of 6V is required for it to operate.As a result, it runs at a minimal voltage of 6V in order to achieve the best efficiency.There is 60V maximum value for supply current.With a minimum supply current less than 1A, this device achieves high efficiency.1A is the maximum amount of current that can be supplied to the load.This electronic component can fully perform when the switching frequency is 500kHz.LED drivers from the Automotive, AEC-Q100 series are essential components for a wide variety of products.It is recommended that the output voltage be no higher than 60V.This device maintains a minimal voltage of -300mV.
ZXLD1366ET5TA Features
Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -40°C~125°C TA
Frequency of 1MHz
Supply voltage of 24V
Switching frequency of 500kHz
ZXLD1366ET5TA Applications
There are a lot of Diodes Incorporated ZXLD1366ET5TA LED Driver ICs applications.
- Other Electronic Devices
- Gallery lighting
- Portable lighting
- Stage and Studio lighting
- White LED Backlight for portable equipment
- Scanners and Handy Terminals
- Street lighting
- Panel lighting
- LED Lighting PFCs, Linear Dimmable
- General lighting
