ZXLD1370EST16TC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXLD1370 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Output Voltage | 60V |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 8V |
| Output Current | 300mA |
| Max Supply Current | 11μA |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 6.3V |
| Max Input Voltage | 60V |
| Internal Switch(s) | No |
| High Level Output Current | 18mA |
| fmax-Min | 0.3 MHz |
| Dimming | PWM |
| Number of Segments | 15 |
| Switching Frequency | 1MHz |
| Voltage - Supply (Min) | 6V |
| Multiplexed Display Capability | NO |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXLD1370EST16TC Overview
16-TSSOP (0.173, 4.40mm Width) Exposed Pad saves board space. As part of the design of this LED driver, there are 1 outputs that have been used.It adopts the way of Surface Mount for mounting.With high efficiency, it emerges as a DC DC Controller.It is capable of working normally at -40°C~125°C TJ.The operation of this system is supported by 16 terminations.A configuration of this chip is made up of 16 pins.It is possible that failures will occur if the voltage supply is below 6V.The number of segments is estimated to be 15.The mount is on its way to Surface Mount.Under the base part number ZXLD1370, you will find this LED driver.It is acceptable for the voltage to be 60V.It is equipped with 16 pin count.The Display Drivers is also assigned based on its characteristics.A voltage of 6.3V is its minimal input voltage.The maximum efficiency standards can be met by operating at the minimal voltage of 8V during operation.When the maximum supply current is allowed, it reaches 60V.This device is able to provide high efficiency when the maximal supply current should be less than 11μA.It is possible to supply the load with 300mA current.It is capable of fulfilling its full functionality when the switching frequency remains at 1MHz.This LED driver belonging to the Automotive, AEC-Q100 series is a key component for a broad range of applications.Currently, it is generating 60V voltage.
ZXLD1370EST16TC Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Supply voltage of 12V
Switching frequency of 1MHz
Output voltage of 60V
ZXLD1370EST16TC Applications
There are a lot of Diodes Incorporated ZXLD1370EST16TC LED Driver ICs applications.
- White LED Backlight for portable equipment
- LED backlight driver for LCD displays for portable equipment
- Panel lighting
- Replacement lamps
- Other Electronic Devices
- Dimmable LED for vehicle interiors
- LED Lightings for Inspection Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
- Gallery lighting
