Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-261-4, TO-261AA |
Weight |
7.994566mg |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Series |
INTELLIFET® |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
3W |
Peak Reflow Temperature (Cel) |
260 |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ZXMS6004 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
1.3A |
Voltage |
5.5V |
Interface |
On/Off |
Current |
1.3A |
Output Configuration |
Low Side |
Power Dissipation |
1.3W |
Output Current |
700mA |
Voltage - Supply (Vcc/Vdd) |
3.3V 5V |
Input Type |
Non-Inverting |
Turn On Delay Time |
5 μs |
Switch Type |
General Purpose |
Rise Time |
10μs |
Drain to Source Voltage (Vdss) |
60V |
Fall Time (Typ) |
15 μs |
Turn-Off Delay Time |
45 μs |
Continuous Drain Current (ID) |
1.3A |
Ratio - Input:Output |
1:1 |
Gate to Source Voltage (Vgs) |
5V |
Voltage - Load |
60V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Rds On (Typ) |
350m Ω |
Drain to Source Resistance |
350mOhm |
Height |
1.65mm |
Length |
6.7mm |
Width |
3.7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
ZXMS6004DGTA Overview
A Tape & Reel (TR) is used to package it.There is a TO-261-4, TO-261AA package that includes it.Surface Mount is the mounting type of the LED driver.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There is a default setting of 1 for output.A supply voltage of 3.3V 5V is required for it to operate.A maximum output voltage of N-Channel volts has been specified.It has a total of Auto Restart features.As you can see, it comes from the ZXMS6004 family.To comply with the operation criteria, the maximum output current is reduced to 1.3A.The LED driving board is mounted in the way of Surface Mount.It belongs to the INTELLIFET? series.This case results in a 700mA output current.
ZXMS6004DGTA Features
ZXMS6004DGTA Applications
There are a lot of Diodes Incorporated ZXMS6004DGTA Power Switches ICs applications.
- HDD and SSD
- Storage (HDDs, SSDs)
- Notebook PC
- Wearable Devices
- Solid-State Drives
- Solid State Drivers
- Portable Devices
- Mobile Communication Devices
- Low Voltage I/O System Power
- Telecom and Network Systems