ZXMS6004DT8TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | INTELLIFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.16W |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.2A |
| Number of Elements | 2 |
| Interface | On/Off |
| Element Configuration | Dual |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Voltage - Supply (Vcc/Vdd) | 3.3V 5V |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 μs |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
| Output Current per Channel | 1.2A |
| Rise Time | 10μs |
| Drain to Source Voltage (Vdss) | 60V |
| Fall Time (Typ) | 15 μs |
| Turn-Off Delay Time | 45 μs |
| Continuous Drain Current (ID) | 1.2A |
| Threshold Voltage | 1V |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 5V |
| Voltage - Load | 60V Max |
| Drain Current-Max (Abs) (ID) | 0.0009A |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 350m Ω |
| Drain to Source Resistance | 400mOhm |
| Nominal Vgs | 1 V |
| Height | 1.5mm |
| Length | 4.95mm |
| Width | 3.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ZXMS6004DT8TA Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 8-SMD, Gull Wing package, it is included.The lighting driver has the mounting type Surface Mount.The switch type is General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There are 2 outputs available on this lighting driver.Operation is based on 3.3V 5V supply voltage.There is a maximum output voltage of N-Channel volts.There are Auto Restart features available on the LED driving board.It contains 8 terminations.The operation is carried out using the 8 pins.This results in the maximum output current dropping to 1.2A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.There are 8 pins in total on this board.Currently, the LED driving board has a resistance of 350mOhm ohms.There is an electrical component included in the INTELLIFET? series.The total number of elements is 2.SWITCHING transistors are applied to the lighting driver.
ZXMS6004DT8TA Features
Resistance of 350mOhm
Transistor applications such as SWITCHING
ZXMS6004DT8TA Applications
There are a lot of Diodes Incorporated ZXMS6004DT8TA Power Switches ICs applications.
- USB Ports/Hubs
- Set-top-box
- Hot-Swap Systems
- USB Power Distribution
- PDAs
- Telecom and Network Systems
- Portable Devices
- Solid-State Drives
- Set-Top Boxes
- Mobile Communication Devices
