ZXMS6004FFTA
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 3.3V 5V |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 μs |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
| Rise Time | 10μs |
| Drain to Source Voltage (Vdss) | 60V |
| Fall Time (Typ) | 15 μs |
| Turn-Off Delay Time | 45 μs |
| Continuous Drain Current (ID) | 1.3A |
| Threshold Voltage | 1V |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 5V |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Number of Drivers | 1 |
| Rds On (Typ) | 350m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 350mOhm |
| Ambient Temperature Range High | 125°C |
| Height | 1mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-3 Flat Leads |
| Number of Pins | 3 |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | Automotive, AEC-Q101, INTELLIFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | HIGH RELIABILITY, LOGIC LEVEL COMPATIBLE |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Base Part Number | ZXMS6004 |
| Pin Count | 3 |
| Output Type | N-Channel |
| Max Output Current | 1.3A |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 830mW |
| Output Current | 1.3A |
ZXMS6004FFTA Overview
Tape & Reel (TR) is how it's packaged.This file is included in package SOT-23-3 Flat Leads.The mounting type of the LED driver is Surface Mount.There is a General Purpose switch type associated with it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.Operation is based on a supply voltage of 3.3V 5V.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Auto Restart features.It comes under the family of ZXMS6004.It contains 3 terminations.The operation is carried out using the 3 pins.Maximum output current falls to 1.3A when operation criteria are met.The LED driving board is mounted in the way of Surface Mount.This LED driver is equipped with a total of 3 pins.It has 350mOhm resistance.This electrical component is included in the Automotive, AEC-Q101, INTELLIFET? series.When this case is used, the output current is set to 1.3A.This LED driver can also produce HIGH RELIABILITY, LOGIC LEVEL COMPATIBLE.A total of 1 drivers are included in the part.A total of 1 elements have been found.SWITCHING transistors are used in the lighting driver.
ZXMS6004FFTA Features
Resistance of 350mOhm
Additional features like HIGH RELIABILITY, LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
ZXMS6004FFTA Applications
There are a lot of Diodes Incorporated ZXMS6004FFTA Power Switches ICs applications.
- Storage Drives
- Hot-Swap Systems
- Low Voltage I/O System Power
- PC Cards
- Portable/Handheld Devices
- Hot Swaps
- PC Card Hot Swap
- Hot Swap
- Wireless Headsets
- Wireless/Networking Cards
