ZXMS6004SGTA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Weight | 7.994566mg |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q101, INTELLIFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | HIGH RELIABILITY |
| Max Power Dissipation | 1.6W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ZXMS6004 |
| JESD-30 Code | R-PDSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.3A |
| Number of Elements | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 1.3A |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 1W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | 3.3V 5V |
| Case Connection | SOURCE |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 μs |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
| Rise Time | 10μs |
| Drain to Source Voltage (Vdss) | 60V |
| Fall Time (Typ) | 15 μs |
| Turn-Off Delay Time | 45 μs |
| Continuous Drain Current (ID) | 1.3A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 700mV |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 350m Ω |
| Drain to Source Resistance | 350mOhm |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXMS6004SGTA Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the TO-261-4, TO-261AA package.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of 3.3V 5V.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Auto Restart.The ZXMS6004 family contains this object.The termination count is 4.In order to meet the operation criteria, the maximum output current drops to 1.3A.Surface Mount is mounted in the way of this LED driving board.This electrical component is part of the Automotive, AEC-Q101, INTELLIFET? series.As a result, the output current is set to 700mA.Using this LED driver, it is also possible to produce HIGH RELIABILITY.A total of 1 elements can be found.It contains SWITCHING transistor applications.
ZXMS6004SGTA Features
Additional features like HIGH RELIABILITY
Transistor applications such as SWITCHING
ZXMS6004SGTA Applications
There are a lot of Diodes Incorporated ZXMS6004SGTA Power Switches ICs applications.
- Telecom and Network Systems
- Hot Swap
- Solid State Drivers
- Portable Music Players
- Solid-State Drives
- Mobile Communication Devices
- Portable Devices
- Portable GPS Device
- Wireless Modem Data Cards
- PC Card Hot Swap
