Parameters |
Number of Pins |
4 |
Weight |
7.994566mg |
Transistor Element Material |
SILICON |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
Series |
Automotive, AEC-Q101, INTELLIFET® |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Resistance |
150mOhm |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
LOGIC LEVEL COMPATIBLE |
Max Power Dissipation |
3W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
4 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
2A |
Number of Elements |
1 |
Interface |
On/Off |
Element Configuration |
Single |
Output Configuration |
Low Side |
Operating Mode |
ENHANCEMENT MODE |
Power Dissipation |
1.3W |
Voltage - Supply (Vcc/Vdd) |
3.3V 5V |
Case Connection |
DRAIN |
Input Type |
Non-Inverting |
Turn On Delay Time |
6 μs |
Switch Type |
General Purpose |
Transistor Application |
SWITCHING |
Output Current per Channel |
2A |
Rise Time |
14μs |
Drain to Source Voltage (Vdss) |
60V |
Fall Time (Typ) |
19 μs |
Turn-Off Delay Time |
34 μs |
Continuous Drain Current (ID) |
1.6A |
Threshold Voltage |
700mV |
Ratio - Input:Output |
1:1 |
Gate to Source Voltage (Vgs) |
5V |
Voltage - Load |
60V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Pulsed Drain Current-Max (IDM) |
6A |
FET Technology |
METAL-OXIDE SEMICONDUCTOR |
Rds On (Typ) |
150m Ω |
Max Junction Temperature (Tj) |
150°C |
Drain to Source Resistance |
150mOhm |
Nominal Vgs |
1 V |
Ambient Temperature Range High |
125°C |
Height |
1.8mm |
Length |
6.55mm |
Width |
3.55mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-261-4, TO-261AA |
ZXMS6005DGTA Overview
The LED driver's packaged as a Tape & Reel (TR).Package TO-261-4, TO-261AA contains it.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~125°C TA.The LED driver has 1 outputs.The LED driving board operates at 3.3V 5V volts.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with Auto Restart features.It contains 4 terminations.For operation, 4 pins are used.This results in the maximum output current dropping to 2A to meet the operation criteria.Surface Mount is mounted in the way.This LED driver is equipped with a total of 4 pins.Lighting drivers with 150mOhm resistance are used.This electrical component is included in the Automotive, AEC-Q101, INTELLIFET? series.The LED driver can also be used to produce LOGIC LEVEL COMPATIBLE.As a whole, there are 1 elements.The LED driver has SWITCHING transistor applications.
ZXMS6005DGTA Features
Resistance of 150mOhm
Additional features like LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
ZXMS6005DGTA Applications
There are a lot of Diodes Incorporated ZXMS6005DGTA Power Switches ICs applications.
- Hot Swap
- USB Ports/Hubs
- Portable/Handheld Devices
- Smartphone and PDA
- Wireless/Networking Cards
- Portable GPS
- USB Power Distribution
- Wireless Modem Data Cards
- Hot Swaps
- Set-top-box