Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SMD, Gull Wing |
Number of Pins |
8 |
Transistor Element Material |
SILICON |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
Series |
Automotive, AEC-Q101, INTELLIFET® |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
150mOhm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
2.13W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
8 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
10A |
Number of Elements |
2 |
Interface |
On/Off |
Output Configuration |
Low Side |
Operating Mode |
ENHANCEMENT MODE |
Voltage - Supply (Vcc/Vdd) |
3.3V 5V |
Input Type |
Non-Inverting |
Turn On Delay Time |
6 μs |
Switch Type |
General Purpose |
Transistor Application |
SWITCHING |
Output Current per Channel |
1.8A |
Rise Time |
14μs |
Drain to Source Voltage (Vdss) |
60V |
Fall Time (Typ) |
19 μs |
Turn-Off Delay Time |
34 μs |
Continuous Drain Current (ID) |
1.8A |
Threshold Voltage |
1V |
Ratio - Input:Output |
1:1 |
Gate to Source Voltage (Vgs) |
5V |
Voltage - Load |
60V Max |
Drain Current-Max (Abs) (ID) |
0.0014A |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
FET Technology |
METAL-OXIDE SEMICONDUCTOR |
Rds On (Typ) |
150m Ω |
Drain to Source Resistance |
150mOhm |
Height |
1.7mm |
Length |
6.7mm |
Width |
3.7mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
ZXMS6005DT8TA Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 8-SMD, Gull Wing package as well.In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~125°C TA for reliable operation.In this LED driver, there are no outputs available.Operation is based on 3.3V 5V supply voltage.The maximum output voltage of this LED driver is N-Channel volts.Auto Restart features are available on the lighting driver.As a result, there are 8 terminations.For operation, we use the 8 pins.This operation requires the maximum output current to be decreased to 10A.As a result, it is mounted in the manner of Surface Mount.The LED driving board is equipped with a total of 8 pins.Currently, the LED driving board has a resistance of 150mOhm ohms.It is part of the Automotive, AEC-Q101, INTELLIFET? series.There are a total of 2 elements.There is SWITCHING transistor application in the LED driver.
ZXMS6005DT8TA Features
Resistance of 150mOhm
Transistor applications such as SWITCHING
ZXMS6005DT8TA Applications
There are a lot of Diodes Incorporated ZXMS6005DT8TA Power Switches ICs applications.
- Low Voltage I/O System Power
- Solid State Drivers
- Portable Devices
- Smart Phones, Feature Phones
- Solid-State Drives
- Smartphone and PDA
- USB Ports/Hubs
- Portable GPS
- Set-top-box
- Hot Swap