ZXMS6006DGTA
| Parameters | |
|---|---|
| Output Type | N-Channel |
| Max Output Current | 2.8A |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 3W |
| Voltage - Supply (Vcc/Vdd) | 3.3V 5V |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Turn On Delay Time | 8.6 μs |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
| Output Current per Channel | 2.8A |
| Rise Time | 18μs |
| Drain to Source Voltage (Vdss) | 60V |
| Fall Time (Typ) | 15 μs |
| Turn-Off Delay Time | 34 μs |
| Continuous Drain Current (ID) | 2.8A |
| Threshold Voltage | 1V |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 5V |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 75m Ω |
| Drain to Source Resistance | 75mOhm |
| Height | 1.65mm |
| Length | 6.55mm |
| Width | 3.55mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 7.994566mg |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q101, INTELLIFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Additional Feature | HIGH RELIABILITY, LOGIC LEVEL COMPATIBLE |
| Max Power Dissipation | 1.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 4 |
ZXMS6006DGTA Overview
Tape & Reel (TR) is the way it's packaged.This file is included in package TO-261-4, TO-261AA.The mounting type of the LED driver is Surface Mount.This switch is of type General Purpose.The temperature should be set to -40°C~125°C TA to ensure reliable functioning.It uses a supply voltage of 3.3V 5V to operate.There is a maximum output voltage of N-Channel volts on this LED driver.In terms of features, the LED driving board has Auto Restart.It consists of 4 terminations in total.The 4 pins are used for the operation of the system.This results in the maximum output current dropping to 2.8A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.4 pins are equipped with it.In this LED driving board, there is 75mOhm resistance.This electrical component is included in the Automotive, AEC-Q101, INTELLIFET? series.With this LED driver, HIGH RELIABILITY, LOGIC LEVEL COMPATIBLE can also be produced.Total, there are 1 elements.The LED driver has SWITCHING transistor applications.
ZXMS6006DGTA Features
Resistance of 75mOhm
Additional features like HIGH RELIABILITY, LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
ZXMS6006DGTA Applications
There are a lot of Diodes Incorporated ZXMS6006DGTA Power Switches ICs applications.
- Portable GPS
- Smartphone and PDA
- USB Protection
- HDD and SSD
- USB Power Distribution
- PDAs
- PC Cards
- USB Power Distribution
- Storage Drives
- Hot-Swap Systems
