ZXMS6006SGTA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 7.994566mg |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q101, INTELLIFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | HIGH RELIABILITY, LOGIC LEVEL COMPATIBLE |
| Max Power Dissipation | 1.6W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.8A |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Voltage - Supply (Vcc/Vdd) | 3.3V 5V |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Turn On Delay Time | 8.6 μs |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
| Output Current per Channel | 2.8A |
| Rise Time | 18μs |
| Drain to Source Voltage (Vdss) | 60V |
| Fall Time (Typ) | 15 μs |
| Turn-Off Delay Time | 34 μs |
| Continuous Drain Current (ID) | 2.8A |
| Threshold Voltage | 1V |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 5V |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 75m Ω |
| Drain to Source Resistance | 75mOhm |
| Nominal Vgs | 1 V |
| Height | 1.65mm |
| Length | 6.55mm |
| Width | 3.55mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXMS6006SGTA Overview
The LED driver's packaged as a Tape & Reel (TR).It is included with the TO-261-4, TO-261AA package as well.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TA for reliable operation.It is possible to use 1 outputs in the lighting driver.A voltage of 3.3V 5V is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Auto Restart features.It has a total of 4 terminations.The 4 pins are used for the operation of the system.To comply with the operation criteria, the maximum output current is reduced to 2.8A.Surface Mount is mounted in the way.As a result, it has a total of 4 pins.75mOhm is the resistance of the lighting driver.This electrical component is included in the Automotive, AEC-Q101, INTELLIFET? series.With the help of this lighting driver, HIGH RELIABILITY, LOGIC LEVEL COMPATIBLE can also be produced.There are 1 elements in total.The LED driver has SWITCHING transistor applications.
ZXMS6006SGTA Features
Resistance of 75mOhm
Additional features like HIGH RELIABILITY, LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
ZXMS6006SGTA Applications
There are a lot of Diodes Incorporated ZXMS6006SGTA Power Switches ICs applications.
- Low Voltage I/O System Power
- HDD, SSD
- Portable GPS Device
- Handheld Devices
- Portable Video Game Players
- Mobile Communication Devices
- PC Card Hot Swap
- Telecom and Network Systems
- USB Protection
- Hot Swap
