ZXSC100N8TA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 73.992255mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 200kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXSC100 |
| Function | Step-Up |
| Output Voltage | 20V |
| Output Type | Transistor Driver |
| Max Output Current | 1.2A |
| Input Voltage-Nom | 1.2V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Power Dissipation | 780mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 0.98V~3.5V |
| Output Power | 780mW |
| Input Voltage (Min) | 1V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 82 % |
| Number of Output Phases | 1 |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXSC100N8TA Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 0.98V~3.5V. Work well in dc switchers with a 0°C~70°C TA. The Surface Mount makes it ideal for general dc dc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . 8 terminations with a variety of function. PULSE FREQUENCY MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 1.2V. Other relevant dc to dc converter ics can be found by searching "ZXSC100". Switching converter has a total of 8 pins. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the dc dc voltage regulator's minimum input voltage be 1V. DC regulator outputs 20V voltage according to the test statistics. In most cases, the output current of the dc dc regulator will be 500mA, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 82 % during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. Switching controllers operate at 200kHz frequencies. Input current cannot exceed 1.2A with this dc switcher. Switching with 1 phases is the property of this controller.
ZXSC100N8TA Features
Transistor Driver Outputs
PULSE FREQUENCY MODULATION
Max Duty Cycle: 82 %
Frequency: 200kHz
ZXSC100N8TA Applications
There are a lot of Diodes Incorporated ZXSC100N8TA DC to DC converter applications.
- seismic instrument power circuits
- CMM
- Boring machines
- Refrigerators of central air conditioners
- Computer rooms
- Mobile phones
- Computer monitoring equipment of building
- Scientific research
- Thermal power
- Direct power supply system
