ZXSC300E5TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 450mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXSC300 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 94 % |
| Output Voltage | 8V |
| Max Supply Voltage | 8V |
| Min Supply Voltage | 800mV |
| Nominal Supply Current | 4mA |
| Power Dissipation | 450mW |
| Output Current | 3.6mA |
| Max Supply Current | 4mA |
| Quiescent Current | 200μA |
| Max Output Voltage | 1.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 800mV |
| Max Input Voltage | 8V |
| Output Current per Channel | 3.6mA |
| Internal Switch(s) | No |
| Number of Segments | 1 |
| Switching Frequency | 200kHz |
| Voltage - Supply (Min) | 0.8V |
| Multiplexed Display Capability | NO |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXSC300E5TA Overview
Board space is saved by its SC-74A, SOT-753 package.For the design of these LED drivers, 1 outputs are used.It is possible to mount the led driver using Surface Mount.In this case, it emerges as a DC DC Controller with a high efficiency.The led light driver can work at -40°C~85°C TA.There are considerable benefits for Backlight.There are 5 terminations associated with it.The LED light driver has a base configuration of 5 pins.The voltage supply can fail if it is below 0.8V.A total of 1 segments have been created.It's mounted in Surface Mount.It is under the base part number ZXSC300 that the LED driver can be found.It is acceptable for the supply voltage to be 8V.There are 5 pins on it.In addition, it can be classified as Display Drivers according to its characteristics.It operates with the minimal input voltage of 800mV.The maximum efficiency standards can be met by operating at the minimal voltage of 800mV during operation.The maximum value of supply current is 8V.A minimal supply current is required in order for this device to provide high efficiency.3.6mA is the maximum amount of current that can be supplied to the load.It's possible for this electronic component to fully function when the switching frequency is maintained at 200kHz.No external factors result in 200μA current consumption.There is 8V voltage at the output terminal.Ideally, the output voltage should not exceed 1.5V.
ZXSC300E5TA Features
Available in the SC-74A, SOT-753 package
Operating temperature of -40°C~85°C TA
Supply voltage of 1.5V
Switching frequency of 200kHz
Output voltage of 8V
ZXSC300E5TA Applications
There are a lot of Diodes Incorporated ZXSC300E5TA LED Driver ICs applications.
- Amusement Machines
- LED Lightings for Inspection Devices
- Dimmable LED for vehicle interiors
- Auxiliary lights for on-vehicle cameras
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Flicker-free LED Lighting using R1580N
- LED headlights
- Replacement lamps
- OLED power supply for portable equipment
- Refrigeration lighting
