ZXSC310E5TA
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 450mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXSC310 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 94 % |
| Output Voltage | 8V |
| Max Supply Voltage | 8V |
| Min Supply Voltage | 800mV |
| Nominal Supply Current | 4mA |
| Power Dissipation | 450mW |
| Output Current | 3.5mA |
| Max Supply Current | 4mA |
| Quiescent Current | 200μA |
| Output Power | 450mW |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 3.5mA |
| Internal Switch(s) | No |
| fmax-Min | 0.2 MHz |
| Number of Segments | 4 |
| Switching Frequency | 200kHz |
| Voltage - Supply (Min) | 0.8V |
| Multiplexed Display Capability | NO |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
ZXSC310E5TA Overview
The board's SC-74A, SOT-753 package saves space. LED drivers design with 1 outputs.The mounting method is Surface Mount.In this case, it emerges as a DC DC Controller with a high efficiency.The led light driver operates normally at -40°C~85°C TA. The benefits of Backlight are considerable.In this case, it uses 5 terminations.The base of this board is configured as 5 pins.It is likely that undetermined failures will occur if the voltage supply is less than 0.8V.There are estimated to be 4 segments.It's mounted by Surface Mount.ZXSC310 is the base part number for the LED driver.A maximum supply voltage of 8V is acceptable.In addition, it is equipped with a total of 5 pins.Moreover, it can be classified as Display Drivers due to its characteristics.A minimal supply voltage of 800mV is required for it to achieve the highest efficiency.A minimal supply current is required in order for this device to provide high efficiency.A load can be supplied with 3.5mA current.As long as the switching frequency is maintained at 200kHz, this electronic component is able to perform all of its functions properly.200μA current is consumed in the case of no external factors.There is 8V voltage output from it.
ZXSC310E5TA Features
Available in the SC-74A, SOT-753 package
Operating temperature of -40°C~85°C TA
Supply voltage of 1.5V
Switching frequency of 200kHz
Output voltage of 8V
ZXSC310E5TA Applications
There are a lot of Diodes Incorporated ZXSC310E5TA LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Industrial LED Lighting: Image Recognition Devices
- Dimmable LED for vehicle interiors
- A- lamps
- General lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Museum lighting
- LED Lighting PFCs, Linear Dimmable
- Down lighting
- Amusement Machines
