ZXSC400E6TA
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 14.996898mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Max Power Dissipation | 450mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXSC400 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Output Voltage | 10.5V |
| Max Supply Voltage | 8V |
| Min Supply Voltage | 1.8V |
| Power Dissipation | 450mW |
| Output Current | 50mA |
| Quiescent Current | 220μA |
| Output Power | 450mW |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 8V |
| Output Current per Channel | 50mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.2 MHz |
| Number of Segments | 1 |
| Switching Frequency | 200kHz |
| Multiplexed Display Capability | NO |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
ZXSC400E6TA Overview
As a result of its SOT-23-6 package, it helps to save board space on the board. LED drivers design with 1 outputs.Surface Mount is used for mounting the led light driver.It emerges as a DC DC Regulator, which is efficient and reliable.It is capable of operating at a temperature of -40°C~85°C TA. Backlight has considerable advantages.The terminations 6 are designed for its operation.The base of this board is configured as 6 pins.The segment count is 1.There is a device mounted on the Surface Mount.You can find this LED driver under the base part number ZXSC400.A maximum supply voltage of 8V is acceptable.The device has a pin count of 6.It operates with the minimal input voltage of 1.8V.For highest efficiency, it works with a minimal supply voltage of 1.8V.Currently, the supply current can only reach 8V.Loads can only be powered by 50mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 200kHz.Absent external factors, there is 220μA consumption of current.The output voltage is 10.5V.
ZXSC400E6TA Features
Available in the SOT-23-6 package
Operating temperature of -40°C~85°C TA
Supply voltage of 3V
Switching frequency of 200kHz
Output voltage of 10.5V
ZXSC400E6TA Applications
There are a lot of Diodes Incorporated ZXSC400E6TA LED Driver ICs applications.
- Sports Facility Lighting
- General lighting
- LED backlight driver for LCD displays for portable equipment
- Stage and Studio lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Linear fluorescent
- Amusement Machines
- Stage Lighting and Signage
- OLED power supply for portable equipment
- LED Lightings for Industrial Equipment
