ZXSC410E6TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 14.996898mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXSC410 |
| Function | Step-Up |
| Efficiency | 85 % |
| Output Voltage | 300mV |
| Output Type | Transistor Driver |
| Max Output Current | 300mA |
| Operating Supply Voltage | 8V |
| Input Voltage-Nom | 3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | 1.8V~8V |
| Control Features | Enable |
| Topology | Boost |
| Min Input Voltage | 1.65V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz |
| Max Input Voltage | 8V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 85 % |
| Number of Output Phases | 1 |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXSC410E6TA Overview
This switching controller fits most application requirements since it is packaged in a SOT-23-6 package. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 1.8V~8V volts and has 1.8V~8V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. This switching controller can switch at 200kHz. The Surface Mount allows it to be used for dc dc regulator in general. Enable provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. Various 6 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 3V is input. In addition to "ZXSC410", there are other relevant dc to dc converter ics you can find. There are a total of 6 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 300mV voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 300mA. voltage regulator dc to dcs with a 85 % duty cycle are designed to be reliable when powered on and powered off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A circuit should contain 8V in order to ensure the voltage regulator dc to dc runs safely and reliably. In order to limit the voltage of a dc switcher whose maximum input voltage is 8V, it must be limited by the user. Voltage 1.65V must be supplied. There will be 300mA output current greater than 300mA from the dc switcher. With this controller, the phase is 1.
ZXSC410E6TA Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
ZXSC410E6TA Applications
There are a lot of Diodes Incorporated ZXSC410E6TA DC to DC converter applications.
- Radio equipment
- Window air conditioners
- Precision electronic equipment
- Surface processing equipment
- Direct power supply system
- Linear guide
- Series voltage regulation circuits
- Machining centers
- Adjustable voltage or current linear circuits
- Digital display device
