ZXSC420E6TA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 14.996898mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXSC420 |
| Function | Step-Up |
| Efficiency | 85 % |
| Output Voltage | 300mV |
| Output Type | Transistor Driver |
| Max Output Current | 300mA |
| Operating Supply Voltage | 8V |
| Input Voltage-Nom | 3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | 1.8V~8V |
| Control Features | Enable |
| Topology | Boost |
| Min Input Voltage | 1.65V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 8V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 200kHz |
| Max Duty Cycle | 85 % |
| Number of Output Phases | 1 |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXSC420E6TA Overview
Capsuled in the SOT-23-6 package, the switching controller suits most application needs. Tape & Reel (TR) solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). 1.8V~8V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Enable for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. There are many different types of terminations for 6. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 3V volts. You can find other relevant dc to dc converter ics by searching "ZXSC420". 6 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 300mV. You should note down the dc dc regulator's usual output current of 300mA when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 85 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator200kHz has the maximum frequency. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 8V. In order to limit the voltage of a dc switcher whose maximum input voltage is 8V, it must be limited by the user. A voltage of 1.65V must be present in the supply. A dc switcher can only produce an output current of 300mA. There are 1 phases in this controller.
ZXSC420E6TA Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
ZXSC420E6TA Applications
There are a lot of Diodes Incorporated ZXSC420E6TA DC to DC converter applications.
- Radio equipment
- Scientific research
- Analog precision reference circuits
- Game consoles
- Product testing
- Cutting machine tools
- Sink circuits
- Planers
- Handheld GPS
- Computer monitoring equipment of building
